
B&B Electronics, Inc. SPECTRE Configuration Manual
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
1.2. Network status
To view the current system information for the router, select the Network menu item.
The upper part of the window displays detailed information about the active interfaces.
Primary Ethernet interface
PPP Interface (active connection to GPRS/EDGE/CDMA)
Table 1: Interface connection status
The following detailed information will be shown for each active connection.
Hardware MAC (unique) address of primary network interface
IP address of primary network interface
IP address second ends connection
Maximum transmittable packet size
Number of routers that the packet must pass through
packets – number of received packets
errors - number of errors
dropped - number of dropped packets
overruns – incoming packets lost because of overload
frame – number of frame errors
packets – number of transmitted packets
errors - number of packet errors
dropped - number of dropped packets
overruns – number of outgoing packets lost because of overload
carrier - outgoing packet errors resulting from the physical layer
Number of collisions on physical layer
Number of packets in the transmit queue
Total number of received bytes
Total number of transmitted bytes
Table 2: Description of information in network status
If the PPP connection is active, the system information will appear on the ppp0 interface.
For the SPECTRE RT industrial router, interface ppp0 indicates the PPPoE connection.
Comentários a estes Manuais