B&B Electronics Parallel Printer Card PIOC Manual do Utilizador descarregar pdf (Página 57)

Specifications

Operating Temperature Range (non-condensing) 32° F - 100° F

Power Supply Input Range 12 VDC – 16 VDC

Charge Current Setpoint Range 0.1 A – 12.0 A

Charge Current Setpoint Resolution Below 2 A-- 0.1 A; Above

2 A – 0.5 A

Max Charge Start Delay 999 minutes

Discharge Current Setpoint Range 0.5 A – 35.0 A

Discharge Current Setpoint Resolution Below 5 A – 0.1 A; Above

5 A – 1 A

Motor Current Range Up to 20 A

Motor Voltage Setpoint Range 0.5 V – 8.0 V

Cooldown Delay Between Cycles 0 minutes - 180 minutes

Max Delay Between Peak Detects 1 and 2 0 seconds – 999 seconds

Trickle Charge Rate 100 mA (0.1 A)

Peak Detect Voltage Setpoint Range 0.01 V – 0.19 V

Auto Repeak Yes; up to 2

Built-in Peak Detect Lockout Time 1 minute

Long Lockout Peak Detect Time (optional) 10 minutes

Cell Count 1 to 8 Cells

Voltage Measurement Resolution Below 2 V - 1 mV; Above

2V – 10 mV

Current Measurement Resolution 100 mA

Maximum # of Stored Voltage Points for Charge Profile 500

Maximum # of Stored Voltage Points for Discharge Profile 500

# of Setups 10

Power Supply Requirements

The power supply chosen for use with the T35-GFX should possess the following

specifications:

Voltage Output 12 VDC – 16 VDC

Current 20 A DC

The current requirement is controlled by the maximum rate you intend to charge your

packs at, and the maximum current delivered to your motors while using the motor run

feature. If you normally use lower settings, you can get away with a lower current power

supply, perhaps as low as 7 or 8 amps.

CEI does sell a small footprint power supply for use with the T35-GFX.

See

http://www.competitionelectronics.com/pwr%20supply.html

for details.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Sem comentários

B&B Electronics Parallel Printer Card PIOC Manual do Utilizador Página 57