P104-WDG-CSM User Manual
21
Chapter 6: Specification
Watchdog Timer
• Time-out: Software selectable from 2 sec. to 2060 sec
• Pulse Width: Output, 120 nsec. Minimum, 31 msec. Maximum
• Clock: 2.08333 MHz, derived from computer clock (33 MHz÷16)
• Address: 8-Bit I/O Mapped
Status Monitor Register
• Voltages IRQ and register indication if +5, +12, or -12 varies by more than +/-6%
• Temp. Alarm: IRQ and status register indication when above ~ 122°F (50°C)
• Temp. Digitizer: 8 bit ADC, LSB = 0.7 °F (0.39
o
C)
• Isolated Outputs: Two, (customer supplied 5 - 24V) through a 330 resistor
• Isolated Inputs: Two, opto-isolated and current limited through 330 , one may be re-
assigned as External Reset
• Reset Outputs: Active low open collector, active high with 1k pull-up
• Fan Speed: IRQ and Status Register indication if speed is too high or too low
Environmental
• Operating Temp.: 0 to 70C (-40 °C to +85 °C option)
• Storage Temp.: -50 °C to +120 °C
• Humidity: 10% to 90% RH, non-condensing
• Power Required: +5 VDC at 125 mA typical
Comentários a estes Manuais